A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | AA | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Item Name | Price | Qty | Total | Link | Notes | |||||||||||||||||||||
2 | |||||||||||||||||||||||||||
3 | FRAME COMPONENTS | ||||||||||||||||||||||||||
4 | HDPE Side Panels | $120 | 1 | $120.00 | https://www.projectr3d.com/products/side-panel-set | DXFs available from the Fusion 360 CAD Design: http://a360.co/2BZLzTA | |||||||||||||||||||||
5 | 15x15x445 (Misumi HFS3-1515-445 ) | $2.31 | 3 | $6.93 | https://us.misumi-ec.com/ | Misumi pre-cut (2 for the standard build, 3 for the ZL Build) | |||||||||||||||||||||
6 | 15x15x425 (Misumi HFS3-1515-425 ) | $2.21 | 4 | $8.84 | https://us.misumi-ec.com/ | Misumi pre-cut (Horizontal Y) | |||||||||||||||||||||
7 | 15x15x415 (Misumi HFS3-1515-415 ) | $2.15 | 4 | $8.60 | https://us.misumi-ec.com/ | Misumi pre-cut (Corner Uprights) | |||||||||||||||||||||
8 | 15x15x460 (Misumi HFS3-1515-460 ) | $2.39 | 4 | $9.56 | https://us.misumi-ec.com/ | Misumi pre-cut (Horizontal X) | |||||||||||||||||||||
9 | 15x15 Corners (8) | $16.25 | 1 | $16.25 | https://amzn.to/2y9ahlo | 4 Spare corners after ordering | $170.18 | ||||||||||||||||||||
10 | |||||||||||||||||||||||||||
11 | MOTION COMPONENTS | ||||||||||||||||||||||||||
12 | 400mm TR8*2 leadscrew | $16.95 | 3 | $50.85 | http://www.zyltech.com/8mm-t8x2-lead-screw-trapezoidal-acme-w-small-delrin-anti-backlash-nut-kit-custom-length-up-to-1000mm/ | Switched to TR8*2's - requires a different Z steps/mm but Zyltech is a more consistent supplier | |||||||||||||||||||||
13 | 400mm MGN12H + carriage | $34.99 | 6 | $209.94 | https://www.filastruder.com/products/ldo-linear-rails?_pos=1&_sid=61e945897&_ss=r&variant=17989593104455 | 400mm MGN12H | |||||||||||||||||||||
14 | 16 tooth 5mm bore GT2 Pulley | $3.99 | 2 | $7.98 | https://www.aliexpress.com/item/1744808992.html | For X/Y/Z steppers (Only 2 needed for the ZL Build) | |||||||||||||||||||||
15 | Gt2 smooth idlers (2) 5mm ID | $7.99 | 1 | $7.99 | https://amzn.to/2Ryn09g | 1 packs of 5; 2 spares | |||||||||||||||||||||
16 | Gt2 20 tooth idlers (6) 5mm ID | $8.99 | 2 | $17.98 | https://amzn.to/2A0PWAh | for corexy motion gear. 2 packs of 5, 3 spares | |||||||||||||||||||||
17 | 5mm I.D. x 6mm O.D. x 0.40mm Shim | $9.99 | 1 | $9.99 | https://www.filastruder.com/products/shims-for-shoulder-screws | For shimming the bearings | |||||||||||||||||||||
18 | GT2 Belt (5m) | $9.17 | 1 | $9.17 | http://a.co/d/3cVlE5m | X/Y Motion belts (4400mm total, 2200mm per side) | |||||||||||||||||||||
19 | 5mm to 8mm Coupling | $4.95 | 3 | $14.85 | http://www.zyltech.com/flexible-plum-coupler-shaft-various-combinations-from-5mm-to-12-7mm/ | Specify 5mm/8mm | $328.75 | ||||||||||||||||||||
20 | |||||||||||||||||||||||||||
21 | HARDWARE | ||||||||||||||||||||||||||
22 | Threaded Inserts M3 x 0.5 (5mm OD) | $7.46 | 1 | $7.46 | https://amzn.to/2QyLY78 | Brass inserts, tons of spares | |||||||||||||||||||||
23 | Threaded Inserts M5 x 0.8 | $8.75 | 1 | $8.75 | https://amzn.to/2A0V0og | Brass inserts, tons of spares | |||||||||||||||||||||
24 | M3 x 6mm button head bolts | $0.05 | 30 | $1.50 | http://www.boltdepot.com:80/AddToCart.aspx?qty7218=30 | May be needed for thinner rails. Includes spares | |||||||||||||||||||||
25 | M3 x 8mm Button Head Bolts (100) | $3.10 | 1 | $3.10 | http://www.boltdepot.com:80/AddToCart.aspx?qty7219=100 | For the corner cubes, and for mounting the steppers (bag of 100, includes spares) | |||||||||||||||||||||
26 | M3 x 10mm button head bolts (100) | $3.25 | 1 | $3.25 | http://www.boltdepot.com:80/AddToCart.aspx?qty7220=100 | For attaching motor mounts to the frame (need 56, cheaper by the bag) | |||||||||||||||||||||
27 | M3 x 12mm button head bolts | $0.07 | 20 | $1.40 | http://www.boltdepot.com:80/AddToCart.aspx?qty7221=20 | For securing the Z-Yokes (12), electronics (4), Y rail (2) + extras (they're handy to have a few around) | |||||||||||||||||||||
28 | M3 x 16mm button head bolts | $0.08 | 32 | $2.56 | http://www.boltdepot.com:80/AddToCart.aspx?qty7222=32 | For attaching the leadscrews, securing the Y rail, electronics box sides, power switch | |||||||||||||||||||||
29 | M3 x 20mm button head bolts | $0.08 | 12 | $0.96 | http://www.boltdepot.com:80/AddToCart.aspx?qty7223=8 | For attaching your controller and Duex5 | |||||||||||||||||||||
30 | M3 x 30 button head bolts | $0.12 | 4 | $0.48 | http://www.boltdepot.com:80/AddToCart.aspx?qty15292=4 | For attaching the hotend & lower tensioner | |||||||||||||||||||||
31 | M3 x 10mm Hex head Bolts (100) | $5.65 | 1 | $5.65 | http://www.boltdepot.com:80/AddToCart.aspx?qty11100=100 | For bolting the sides & bottom to the rails (Need 74, cheaper to order 100) | |||||||||||||||||||||
32 | M3 x 16mm hex bolts (100) | $7.70 | 1 | $7.70 | http://www.boltdepot.com:80/AddToCart.aspx?qty11102=100 | For attaching the z-axis (can order 54, 46 spares for $1 more) | |||||||||||||||||||||
33 | 3mm x 45mm socket cap bolts | $0.18 | 4 | $0.72 | http://www.boltdepot.com:80/AddToCart.aspx?qty6388=4 | For the belt retainer clips | |||||||||||||||||||||
34 | 3mm x 0.5 nuts (100) | $1.80 | 2 | $3.60 | http://www.boltdepot.com:80/AddToCart.aspx?qty4773=200 | For bolting the rails to the frame, motor mounts to the frame (cheaper to order 100 and have spares) | |||||||||||||||||||||
35 | 3mm lock nuts (100) | $3.19 | 2 | $6.38 | http://www.boltdepot.com:80/AddToCart.aspx?qty4792=200 | For bolting the sides & bottom to the rails (cheaper to order by boxes of 100) | |||||||||||||||||||||
36 | M3 washers (100) | $1.10 | 1 | $1.10 | http://www.boltdepot.com:80/AddToCart.aspx?qty4513=100 | Buy lots of washers, they're cheaper in boxes of 100 | |||||||||||||||||||||
37 | M3 Fender washers | 0.05 | 9 | $0.45 | http://www.boltdepot.com:80/AddToCart.aspx?qty7319=9 | For the bed & PSU | |||||||||||||||||||||
38 | M4 x 12mm Button Head Bolts | $0.09 | 4 | $0.36 | http://www.boltdepot.com:80/AddToCart.aspx?qty6624=4 | For mounting the PSU | |||||||||||||||||||||
39 | M4 Washers | $0.05 | 4 | $0.20 | http://www.boltdepot.com:80/AddToCart.aspx?qty4774=4 | For mounting the PSU | |||||||||||||||||||||
40 | M4 Nuts | $0.05 | 4 | $0.20 | http://www.boltdepot.com:80/AddToCart.aspx?qty4514=9 | For mounting the PSU | |||||||||||||||||||||
41 | M5x50mm Cap Head Screws | $0.40 | 7 | $2.80 | http://www.boltdepot.com:80/AddToCart.aspx?qty6453=7 | Be sure to order the socket cap head, these are partially threaded for the idlers | Not needed if using the aluminum idler mounts & X carriages | ||||||||||||||||||||
42 | M5 steel nylock nuts | $0.07 | 8 | $0.56 | http://www.boltdepot.com:80/AddToCart.aspx?qty4794=8 | For the M5 bolts on the idlers - be sure to get nylon lock nuts | |||||||||||||||||||||
43 | M5 washers | $0.05 | 17 | $0.85 | http://www.boltdepot.com:80/AddToCart.aspx?qty4515=17 | For between the idlers | |||||||||||||||||||||
44 | M2 x 12mm bolts | $0.13 | 6 | $0.78 | http://www.boltdepot.com:80/AddToCart.aspx?qty6366=6 | For the endstop switches & mini IR probe | |||||||||||||||||||||
45 | M2 Nuts | $0.05 | 6 | $0.30 | http://www.boltdepot.com:80/AddToCart.aspx?qty7362=6 | For the endstop switches & mini IR probe | $61.11 | ||||||||||||||||||||
46 | |||||||||||||||||||||||||||
47 | |||||||||||||||||||||||||||
48 | ELECTRONICS | ||||||||||||||||||||||||||
49 | 24v PSU 350w PSU (needs to be 200w or greater with AC bed) | $29.90 | 1 | $29.90 | https://www.arrow.com/en/products/lrs-350-24/mean-well-enterprises | Any 24v PSU > 200W works with the AC bed. | Alternate Source: http://a.co/d/0WK2y7E | ||||||||||||||||||||
50 | Power Switch If using panels from the origina F360 archive | $14.05 | 1 | $14.05 | https://amzn.to/2RDaCVp | 10A 250v Power switch and socket, order a fuse to match. | |||||||||||||||||||||
51 | Power switch If using panels from Project R3d or 713 (Kit panels) | $9.80 | 1 | $9.80 | https://www.digikey.com/product-detail/en/bulgin/BVB01-Z0000-01/708-2400-ND/3961584 | ||||||||||||||||||||||
52 | NEMA 17 steppers for x/y/z/e | $89.99 | 1 | $89.99 | https://www.filastruder.com/products/ldo-stepper-motor-set-for-railcore-ii-300zl-zlt?_pos=2&_sid=cab92960d&_ss=r&variant=17989593104455 | Kit contains all 6 steppers needed | |||||||||||||||||||||
53 | Mini IR probe | $24.99 | 1 | $24.99 | https://www.filastruder.com/collections/electronics/products/mini-differential-ir-height-sensor | Z-Probe, BLTouch or Piezo is also an option | |||||||||||||||||||||
54 | 50mm Layer fan | $7.37 | 1 | $7.37 | https://amzn.to/2RCHde7 | Alternative fan, better quality: https://www.mouser.com/ProductDetail/Delta-Electronics/BFB0524HH?qs=%2FW4LtXOBxKsCMjEwJ8%252b7sw%3D%3D | |||||||||||||||||||||
55 | Bed heater 300mm x 300mm AC silicone pad | $69.99 | 1 | $69.99 | https://amzn.to/2C5mQRC | ||||||||||||||||||||||
56 | SSR | $20.73 | 1 | $20.73 | https://www.digikey.com/product-detail/en/panasonic-electric-works/AQA211VL/255-2977-ND/2364682 | Altnernate Crydom SSR: https://www.digikey.com/product-detail/en/crydom-co/CSW2410/CC1972-ND/751919 | |||||||||||||||||||||
57 | Duet Wifi | $169.99 | 1 | $169.99 | https://www.filastruder.com/collections/electronics/products/duet-wifi | Can substitute your controller of choice, 32bit recommended with 0.9 steppers | |||||||||||||||||||||
58 | Duex5 | $104.99 | 1 | $104.99 | https://www.filastruder.com/collections/electronics/products/duex2-and-duex-5-expansion-board?variant=33002158927 | Can use a Duex2, but recommend a Duex5 for greater flexibility down the road | |||||||||||||||||||||
59 | Bed Thermistor (100K 3950 with lead) | $0.99 | 1 | $0.99 | https://www.amazon.com/Happisland-Thermistor-Wiring-Printer-Heatbed/dp/B01N4KY6TR | Select 100K 3950 with lead thermistor | |||||||||||||||||||||
60 | Endstop switches | $1.53 | 2 | $3.06 | https://www.mouser.com/ProductDetail/Omron-Electronics/D2F-01F?qs=0w99tykdtPLhoVh2lktm%252bQ%3D%3D | OMRON D2F-01F Micro Switch Microswitch SPDT Subminiature | |||||||||||||||||||||
61 | 40mm Electronics Enclosure Fans | 2 | $0.00 | Optional, any 24v, 40mm fan is fine. I haven't installed one yet and have not had heat issues | |||||||||||||||||||||||
62 | 4 conductor wire, 25ft | $19.98 | 1 | $19.98 | https://www.amazon.com/gp/product/B07PMS5KGX/ | Any 22 gauge wire is fine if you have some already, round casing alternative: http://a.co/d/gVUvmuC | $565.83 | ||||||||||||||||||||
63 | |||||||||||||||||||||||||||
64 | HOTEND, BED, ETC | ||||||||||||||||||||||||||
65 | E3D V6 (24V) | $69.99 | 1 | $69.99 | https://www.filastruder.com/products/all-metal-e3d-v6-hotend?variant=1236046388 | Be sure to order the 24v version, universal with bowden | |||||||||||||||||||||
66 | Extruder Option 1 - E3D Titan | $64.99 | 1 | $64.99 | https://www.filastruder.com/collections/titanextruder/products/e3d-titan-extruder | Order the "Standard" version | Choose one extruder - | ||||||||||||||||||||
67 | Extruder Option 2 - Bondtech BMG | $80.00 | 1 | https://www.filastruder.com/collections/bondtech/products/bondtech-bmg-extruder | Order the "Standard" version | The BMG requires the BMG mount, not the titan mount. | |||||||||||||||||||||
68 | E3D Bowden Coupler | $7.99 | 1 | $7.99 | https://www.filastruder.com/collections/e3d-spare-parts-and-accessories/products/bowden-couplings-all-types?variant=21286000324 | Be sure to select "1.75mm" and "Groovemount" | |||||||||||||||||||||
69 | LokBuild 12x12 Print surface | $25.00 | 1 | $25.00 | https://amzn.to/2oXcg7w | This is optional, any print surface in a 250mm^2 or 10x10 works. Printinz, PEI, boro etc. | |||||||||||||||||||||
70 | 340mmx 325mm Aluminum Bed for ZL (300x300 usable) | 60 | 1 | 60 | 713maker.com | DXF's can be pulled out of the Fusion 360 Model | |||||||||||||||||||||
71 | 1/4 Flat washers | $5.40 | 1 | $5.40 | https://amzn.to/2x4a2Xz | For between the yoke & the bed | $233.37 | ||||||||||||||||||||
72 | |||||||||||||||||||||||||||
73 | Total | $1,353.84 | |||||||||||||||||||||||||
74 | |||||||||||||||||||||||||||
75 | |||||||||||||||||||||||||||
76 | Optional Components - The aluminum Stepper mounts, idler carriers, and X carriages are strongly recommended | ||||||||||||||||||||||||||
77 | PanelDue 5i (5" with pre-made cable) | $89.99 | 1 | $89.99 | https://www.filastruder.com/products/paneldue-5i?variant=12524929876039 | Optional, but recommended | |||||||||||||||||||||
78 | Aluminum Idler Carriers | $20 | 1 | $20.00 | 713maker.com | ||||||||||||||||||||||
79 | Aluminum X/Y Stepper Mounts | $20 | 1 | $20.00 | 713maker.com | ||||||||||||||||||||||
80 | Aluminum X carriages | $40 | 1 | $40 | http://www.mandalaroseworks.com/product/railcore | ||||||||||||||||||||||
81 | Aluminum Z-Yokes | $75.00 | 1 | $75.00 | http://www.mandalaroseworks.com/product/railcore | ||||||||||||||||||||||
82 | 5mm shoulder bolt, 10mm shoulder | $1.99 | 2 | $3.98 | https://www.filastruder.com/products/shoulder-screws-bolts?variant=16712533835847 | Required for the aluminum Idler mounts (if using the e3d idlers get 12mm) | |||||||||||||||||||||
83 | 5mm shoulder bolt, 20mm shoulder | $1.99 | 4 | $7.96 | https://www.filastruder.com/products/shoulder-screws-bolts?variant=16712533868615 | 2 Required for the aluminum Idler mounts, 2 required for the aluminum X carriages (if using the e3d idlers get 25mm) | |||||||||||||||||||||
84 | |||||||||||||||||||||||||||
85 | |||||||||||||||||||||||||||
86 | Optional - Wire wrap sleeve | ||||||||||||||||||||||||||
87 | 1/8" split loom sleeve | http://a.co/d/clnRLe0 | |||||||||||||||||||||||||
88 | 1/2" split loom sleeve | http://a.co/d/2alpc3l | |||||||||||||||||||||||||
89 | 1/4" split loom sleeve | http://a.co/d/ahTHse2 | |||||||||||||||||||||||||
90 | |||||||||||||||||||||||||||
91 | |||||||||||||||||||||||||||
92 | |||||||||||||||||||||||||||
93 | |||||||||||||||||||||||||||
94 | |||||||||||||||||||||||||||
95 | |||||||||||||||||||||||||||
96 | |||||||||||||||||||||||||||
97 | |||||||||||||||||||||||||||
98 | |||||||||||||||||||||||||||
99 | |||||||||||||||||||||||||||
100 |